Knowledgebase Contact Us
How Can We Help?
< Knowledgebase
Print

PRO-150 Joystick Programming

This page describes how to use the “pot learn” feature of the Pro-150 to set up joystick programming, [or wig-wag operation].

Before starting this sequence the Pro-150 should have power connected to B+ and B-, the ignition circuit should be connected and the joystick or pot should be connected. Do not have the motor connected until you have finished.

  1. Press the SEL key while turning on the power / ignition, you should get flashing 00. on the display.
  2. Press the + key to step through to parameter 12 then press the SEL key.
  3. Move the joystick or pot to the full ahead position [the display should show around 99] then press SEL.
  4. Press the + key to step through to parameter 13 then press the SEL key.
  5. Move the joystick or pot to the stop position [the display should show around 50] then press SEL.
  6. Press the + key to step through to parameter 14 then press the SEL key.
  7. Move the joystick or pot to the full reverse position [the display should show around 0] then press SEL.
  8. Press the + key to step through to PG then press the SEL key.

That’s it