They say a picture is worth a thousand words. Here are some videos about what we do, installation and troubleshooting for our controllers.
What we do
What we do.
A small selection of what customers have built using our products.
Installation
Important installation points for all controllers.
How to fit the IDC connectors to the control cables for our controllers.
How and why you should fit noise suppression.
Installing a Pro-160.
Pro-100 / 160 / 360 menu walkthrough.
How to wire up a Porter.
The 6 pin connector explained. Applies to all Pro and DNO series controllers.
The horn relay board explained.
Basic wiring instructions for the HRB.
Troubleshooting
Basic fault finding on the Pro-150.
Basic fault finding on the DNO.
Basic fault finding on the Porter.
Basic fault finding on the Pro-120.
How to test an electric motor. Short and open circuit windings can damage controllers, here’s how to check.
How to use a multimeter.
Diagnostics on the Pro-160 / 360 using data logging.
Features of the Pro-100 / 160 / 360 series
Fault codes and error messages.
Acceleration and deceleration ramps.
Speed limiting.
Repair
How to fit a self re-setting fuse.
Background information
What does a speed controller do?
How they are made.
Manage Consent
We’re sorry – it’s another irritating cookie banner, but we have to show this for our website to be legal. We try to keep our cookies to a minimum and it would help us if you would accept. But we understand if you don’t, and want to stay completely private, but some features of the website may not work too well.
Functional Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
We’re sorry – it’s another irritating cookie banner, but we have to show this for our website to be legal. We try to keep our cookies to a minimum and it would help us if you would accept. But we understand if you don’t, and want to stay completely private, but some features of the website may not work too well.
Functional Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
