From Issue 7, two scratch-through links are present on the circuit board. If both of these are broken, regenerative braking will be disabled. However this modification is not recommended: our experience shows that in almost all applications it is best to leave regen brraking properly enabled. If you feel you should disengage it we suggest you use the contact button and tell support exactly why you think it should be dis-engaged.
Warning.
The information here is given in good faith and on the understanding that you accept full responsibility. Modified controllers may not be repairable and any modification will invalidate any warranty.
Do not attempt this modification unless you are fully competent: if done incorrectly the controller will be destroyed. Both links must be properly broken, or both links must be properly made.
Be careful also to avoid damaging any other tracks when modifying.
The two links to be broken are indicated by the black arrows.