The 1QD is a 'special product' - the Uni does everything that the 1QD and 2QD series do, so the 1QD series are not normally stock items and are built only to special order, subject to minimum quantity order. However, when we build we normally manufacture a larger batch than required, when small quantity orders can be accepted. However, for general use, we advise the Uni series.
4QD's 1QD series are motor speed controllers for 12v or 24v battery operation. They are state-of-the-art MOSFET chopper drivers giving fully variable fine speed control. Two versions are available, 1QD-70 and 1QD-35, in 12v or 24v options - 36v and 48v versions are available to special order.
The controller is designed primarily for mobile uses such as heavy golf caddies (or golf trolleys), miniature railways, model cars but may be used for other applications as well. The controllers has special circuitry to reduce heat dissipation making them far more powerful than the industry standard golf caddy controllers.
The controller has been 'value engineered' for high volume users but we have taken great pains to ensure that the 1QD is technically as good as possible. It is a circuit board suitable for mounting inside a diecast aluminium box. It is highly efficient, minimising losses, maximising battery life and giving excellent fine speed control. It are fully protected against overload and a thermal cutout is available as an option (on quantity orders) making the unit virtually indestructible.
| Supply voltage | 12v or 24v. 36v and 48v versions are available. | |
| Supply current | 20mA | at zero speed |
| Output voltage | 0 to 100% full speed | |
| Output current (typical) | 100 amps cold | (70amp version) |
| 70 amps hot | 70amp version | |
| 20 amps hot, cutout operated. | ||
| Voltage drop | 140mV at 20 amps | typical 70amp version |
| Switching frequency | 20kHz approximately | |
| Input | 10k pot | (can be supplied for 1k to 100k) |
| Input volts for full speed | 3v approx at pot slider | |
| Overvoltage (pot fault detect) | 6v approx | |
| Size | 93mm x 55mm x 35mm | |
| Weight | 100g |
Construction: the controller consists of a circuit board with an aluminium heatsink mounted vertically at one end. The heatsink forms the main mounting so that the mounting or box gives additional heat dissipation.
The control range from the speed pot can be factory set either full scale to use the full 270° rotation of a standard pot, or it can be 1/3 full scale, using only 90° of the pot, making it suitable for twist-grip type speed controls.
Will fit in to an industry standard diecast aluminium box
The 1QD series are 'Special Products' now - contact our sales department if you have a quantity requirement (generally 25+ pieces).
You can download the instruction manual, in PDF format, via our manuals and catalogues page.