4QD controllers Accessories
Motor controllers Accessories Shopping cart Instruction manuals Specifications and features Questions answered Service and fault finding Wiring diagrams Application notes

Accessories for battery vehicles

Control Boxes and leads

Garden railways and similar machines often want a hand control box. These can be used with VTX, Pro-120, Pro-150 or 4QD series controllers.

See also our new:
Spring return to zero hand control box
Horn/lighting relay board
on a separate page.

Please note that the items on this page are not compatible with the above two items.

Contents this page

• Hand Control Boxes
• Control leads
• Control leads, Female
• Control leads, Extension

Hand Control Boxes

HCB-600 - see below	RBT-810 see Loco accessories

This uses the BOX-123
HCB-600 has a standard rotary pot for speed and a round rocker switch for reversing.
In addition to the HCB you will also need to order an appropriate control lead

Also available without the 6 way connector set, with connectors for VTX/Pro or 4QD series controllers.

Control leads

To connect the above hand control boxe HCB-600 to the controller.
Control leads for RBT-810 are on the Loco accessories page.

Above: Control lead for VTX series or Pro series: CLB-606

Above: Control lead for 4QD series: CLB-634

Control leads, Female

If you want to make your own control box, here is a mating pre-wired lead - Control lead, single ended: CLF-600

Also available as a double ended lead with a Bulgin at each end. Standard length 220cm. Other lengths to order.

Control leads, Extension

Or as an extension lead, which you can cut in the centre if you so require.

Top of page

Page Information